Description
Uni-directional condenser microphone suitable for vocal/voice recording. Inheriting the microphone capsule used in the C-100 and using the same material as the C-800G for the diaphragm, this microphone inherits the essence of the predecessors. The dual diaphragm configuration suppresses sound characteristics changes with distance (proximity effect), enabling stable recording/distribution. "Noise Elimination Construction" succeeded from C-800G/C-100 prevents acoustic vibration resulting in low noise and clear sound. Features Excellent Sound Quality Powerful and rich mid-low frequency range provides vocals and voice recordings with a core sound and presence. Dual Diaphragm Configuration Dual diaphragm configuration realizes stable recording/distribution by suppressing sound characteristics changes with distance (proximity effect). Noise Elimination Construction Two-part metallic body structure succeeded from C-800G/C-100 microphone prevents acoustic vibration resulting in low noise and clear sound. Low-Cut Filter Low-Cut filter switch helps eliminate low-frequency nose and proximity effect. Pad Switch An -10dB pad switch on the microphone provides added headroom and minimizes distortion caused by transient peaks.
Capsule TypeCondenser Microphone Frequency Response20Hz～20kHz DirectivityUni directional Sensitivity *[1]-30 dB (deviation ±3 dB) (0 dB=1 V/Pa, 1 kHz) Output Impedance *[2]90Ω±15%, Balanced Dynamic RangeMore than 125.5 dB Signal-to-Noise Ratio *[3]81.5dB Inherent Noise *[4]Less than 12.5 dB SPL (0 dB=2 × 10-5 Pa) (IEC* 61672-1 A-Weighted, 1 kHz, 1 Pa) Maximum Input Sound Pressure Level *[5]More than 138 dB SPL (output level for 1% waveform distortion at 1 kHz, converted into equivalent input sound pressure level: 0 dB=2 × 10-5 Pa) ConnectorXLR-3-12C (male) Mic CableXLR 3-pin Cable Required (Not Supplied) Power RequirementsDC 44 to 52 V Dimensions *[6]Approx. 40 mm (1.57 in.) dia. × 158 mm (6.22 in.) MassApprox. 215 g (7.6 oz) Supplied AccessoriesCradle suspention (1) Operating instructions (1) Carrying case (1) *[1]0 dB = 1 V/Pa, at 1 kHz *[2]Output impedance at 1 kHz *[3]A-weighted, 1 kHz, 1 Pa. *[4]0dB SPL = 20μPa. *[5]0 dB SPL = 20μPa. *[6]The values for dimensions are approximate.