Bondex Satin Woodstain Protection 2.5 Litre - , Exterior with UV and Moisture Defence, 10-15 m² per Coverage, Brown, 2.5L

Solvent-based exterior woodstain in a satin finish Teak colour - colour code 905 Satin Teak 2.5L covers 25 to 37.5 m² in 2-3 coats Coverage rate: 10-15 m² per litre Touch dry in 4-6 hours; recoatable after 16 hours Protects against UV rays, moisture, mould, and blue stain Suitable for windows, doors, cladding, and garden furniture Apply by brush, dipping, or airless sprayer Bondex Satin Wood Protection Teak 2.5L - Exterior Woodstain with UV and Moisture Defence Satin finish that feeds and guards outdoor timber: Bondex Satin Wood Protection is a solvent-based, translucent woodstain that forms a durable surface film on exterior timber. It protects against blue stain, mould, water ingress, and UV rays while leaving a clean satin sheen that gives weathered wood a fresh, renovated appearance. Good coverage and straightforward application: Each litre covers 10 to 15 square metres, so the 2.5-litre can treats between 25 and 37.5 square metres in two to three coats. Apply by brush, by dipping, or by airless sprayer at temperatures above 5°C and below 80% relative humidity. The product is touch dry in four to six hours and recoatable after 16 hours at 23°C and 60% relative humidity. Wide range of suitable timber surfaces: Bondex Satin is suited to windows, doors, shutters, eaves, cladding, garden furniture, and decorative woodwork across all common outdoor wood species. For best results, the moisture content of softwood should not exceed 15%, and hardwood should not exceed 12% before application. Shop our full ting & Decorating range at Heavins.ie, serving customers across Ireland with quality brands for every home improvement project. Specifications Brand: Bondex (PPG Architectural Finishes) Product Line: Bondex Satin Wood Protection Colour: Teak (905 Satin Teak) Finish: Satin Base Type: Solvent based Volume: 2.5 Litres Coverage: 10-15 m² per litre (25-37.5 m² per 2.5L tin) Number of Coats: 2-3 coats recommended Application Method: Brush, dipping, or airless sprayer Touch Dry: 4-6 hours Recoatable: 16 hours (at 23°C, 60% relative humidity) Min. Application Temperature: 5°C Max. Relative Humidity at Application: 80% Max. Moisture Content (Softwood): 15% Max. Moisture Content (Hardwood): 12% Biocides: 3-Iodo-2-propynyl-butylcarbamate, 2-Octyl-2H-isothiazol-3-one, Pyrithione Zinc Suitable Surfaces: Windows, doors, shutters, eaves, cladding, garden furniture, decorative woodwork