Description
LD Systems ANNY 12 HHD B6 – Portable Battery-Powered PA System The LD Systems ANNY 12 HHD B6 is the largest and most versatile model in the ANNY family of battery-powered PA systems. This complete, active two-way loudspeaker system delivers professional sound wherever mobility and independence from electrical power are essential. The HHD variant includes a wireless handheld microphone with AA batteries, making the set ready for immediate use right out of the box — simply turn on the power and start your event. Product Features Active, two-way full-range system featuring a 12″ woofer and a 1″ compression driver with CD horn Power output of 185 W RMS / 215 W peak and a maximum SPL level of 122 dB across a frequency range of 40 Hz – 20 kHz Integrated 6-channel mixer with a 3-band EQ, reverb and delay effects, and 5 presets (MUSIC, LIVE, VOCAL, ECO, FLAT) Wireless handheld microphone included in the package, along with AA batteries Operating time up to 50 hours in ECO mode and up to 5 hours at maximum volume Hot-swap function for four batteries – replace batteries without interrupting system operation Bluetooth 5.0 with TWS stereo streaming between two ANNY 12 units DynX® DSP processor (Gen. 2) eliminating distortion at full drive Wheels and telescopic handle for easy transport, plus a USB-C port for charging smartphones or tablets Professional Sound Without Compromise – Anywhere The heart of the ANNY 12 HHD B6 is a Class D amplifier with 185 W RMS (215 W peak) power, paired with a 12-inch woofer featuring a neodymium magnet and 2″ voice coil, and a 1-inch compression driver with a CD horn and 1.4″ voice coil. This combination ensures a frequency response from 40 Hz to 20 kHz, a maximum SPL of 122 dB, and a radiation pattern of 90° horizontally and 50° vertically, allowing sound to cover the stage and audience evenly. The crossover operates at 1600 Hz, while the entire system is managed by the second-generation DynX® DSP processor, ensuring a clean, distortion-free signal even at maximum drive. The integrated 6-channel mixer turns this system into a standalone audio station. Available inputs include XLR combo jacks and a 3.5 mm jack socket, as well as a 3-pin XLR output, allowing you to expand the configuration with additional devices. The three-band equalizer and five presets – MUSIC, LIVE, VOCAL, ECO, and FLAT – tailor the sound to the nature of the event, while built-in reverb and delay effects add spatial depth to vocals. The wireless handheld microphone allows an MC, host, or vocalist to use the system from the very first minute. The Bluetooth 5.0 module with SBC and AAC codecs enables music streaming from a phone or computer, while the True Wireless Stereo function allows two ANNY 12 systems to be connected into a truly wireless stereo setup. Power is supplied by four 14.8 V lithium-ion batteries, each with a capacity of 6700 mAh. ECO mode extends operating time to up to 50 hours, and a full charge takes approximately 3 hours (80% in 2 hours). The hot-swap function allows batteries to be replaced during operation, so the PA system does not need to be turned off between program segments. The USB-C port enables direct charging of a tablet or smartphone from the system, which can be invaluable during multi-hour outdoor events. Applications City festivals, fairs, and cultural events Corporate parties, conferences, training sessions, and trade shows Clubs, special occasions, and sports competitions School assemblies, ceremonies, and school celebrations Detailed Technical Specifications Type: Active, two-way full-range system RMS Output Power: 185 W Peak Power: 215 W Amplifier Class: Class D Maximum SPL Level: 122 dB (peak), 116 dB (average) Frequency Response (-10 dB): 40 Hz – 20,000 Hz Crossover Frequency: 1600 Hz Beam Angle: 90° horizontal / 50° vertical Woofer: 12″, neodymium, 2″ voice coil Tweeter: 1″, ferrite, compression driver with CD horn, 1.4″ voice coil Number of Inputs: 5 (XLR combo, 3.5 mm TRS jack) Outputs: 1 × 3-pin XLR Bluetooth: 5.0, SBC and AAC codecs, range up to 10 m (Class 2) Batteries: 4 × Lithium-ion 14.8 V, 6700 mAh Operating Time: 5 h (MUSIC) – 50 h (ECO) Charging Time: 3 h (100%), 2 h (80%) Mains Power: 100–240 V AC / 50–60 Hz, SMPS switch-mode power supply Enclosure: Bass reflex, ABS; Front grille: Aluminum Dimensions (W × H × D): 405 × 655 × 341 mm Weight: 20.96 kg Operating Temperature: 0 °C – 40 °C, maximum humidity 80% Materials and Construction The bass reflex enclosure is made from durable ABS, which withstands the rigors of transport and outdoor work while remaining relatively lightweight for a system of this size. The protective front grille is made of aluminum, safeguarding the transducers from mechanical damage and giving the unit a professional appearance. The woofer is based on a neodymium magnet, while the high-frequency compression driver uses a ferrite magnet with a CD horn. The design is completed with tran...